Moldcare Patient Immobilization Device

Moldcare

Clinical Restraining brace for the Head, Neck, Chest, Trunk and Pelvic regions

Moldcare is a customized patient immobilizing brace designed with state of the art modeling techniques for optimum speed and accuracy. The maintenance of the patient’s ideal posture can be significantly improved during radiotherapy.

  1. Individually customized positioning of patient’s posture during radiotherapy can be achieved with maximum accuracy and the failure in the adjustment of the irradiation field can be prevented.
  2. Moldcare is made of low specific gravity base material and can be used in dose distribution measurements through CT simulation and therapeutic procedures.
  3. By carefully adjusting the temperature and quantity of water applied
    Moldcare can be modeled according to each patient’s condition.

PROCESSING PROCEDURE

Before processing the mold, read the manual carefully.
Processing Procedure
Remove Moldcare from aluminum package. Evenly put water into Moldcare by spray.
Processing Procedure
Remove excess surface water with a cloth. Mold to the approximate shape of the patient in a reclining position.
Processing Procedure
The patient lies down on Moldcare & molding is completed.
Processing Procedure
The process is then complete. The patient stands & the mold is left to complete setting which takes approximately 20 minutes at room temperature.
Processing Procedure
Remove Moldcare from aluminum package. Evenly put water into Moldcare by spray.
Processing Procedure
Remove excess surface water with a cloth. Mold to the approximate shape of the patient in a reclining position.
Processing Procedure
The patient lies down on Moldcare & molding is completed.
Processing Procedure
The process is then complete. The patient stands & the mold is left to complete setting which takes approximately 20 minutes at room temperature.

BENEFITS

For the Head, Neck, Chest, Trunk and Pelvic regions

Patient posture-adjusting material

The superior base material enables accurate modeling of the patient’s posture.

Reduction of labor time

This revolutionary new patient immobilizing device requires little time or space to set up.

Improvement of patient's Quality Of Life

Patients are provided with a comfortable and secure fit which reduces discomfort during treatment.

High permeability for radiation

It can be used during treatment with a CT simulator as it has a high permeability to radiation.

Volume reduction of waste products

After use to facilitate disposal, the size of the Moldcare can be reduced by use of an autoclave.

MR Safe

Moldcare RI is MR Safe. Therefore, Moldcare RII can be safety taken into any MRI environment
HN 1 Moldcare Patient Immobilization Device
HN 1
HN 1 Moldcare Patient Immobilization Device
BR 1
BR 3 Moldcare Patient Immobilization Device
BR 3
HN 2 Moldcare Patient Immobilization Device
HN 2
HN 5 Moldcare Patient Immobilization Device
HN 5
HN C Moldcare Patient Immobilization Device
HN C
HN E
HN E
HN S
HN S
HN TR
HN TR
HN UT
HN UT
Product NameTypeItem No.SpecificationContents Per Pack
Moldcare RI II-HN0.59306620cm × 15cm1 pce
19374120cm × 25cm1 pce
29374220cm × 45cm1 pce
E94512Upper Base: 7cm
Lower Base: 20cm
Height: 34cm
1 pce
C95942Upper Base: 12cm
Lower Base: 20cm
Height: 35cm
1 pce
TR94232Trapezoid shape
Upper Base: 5cm
Lower Base: 58cm
Height: 65cm
1 pce
UT94521Upper Base: 20cm
Lower Base: 58cm
Height: 47cm
1 pce
S95941Upper Base: 30cm
Lower Base: 58cm
Height: 55cm
1 pce
 
Moldcare RI II-BR19382140cm × 60cm1 pce
39382260cm × 60cm1 pce

Contact us

Questions? Feedback? Call us or send us a message!