Moldcare Patient Immobilization Device

Moldcare

Clinical Restraining brace for the Head, Neck, Chest, Trunk and Pelvic regions

Moldcare is a customized patient immobilizing brace designed with state of the art modeling techniques for optimum speed and accuracy. The maintenance of the patient’s ideal posture can be significantly improved during radiotherapy.

Individually customized positioning of patient’s posture during radiotherapy can be achieved with maximum accuracy and the failure in the adjustment of the irradiation field can be prevented.
Moldcare is made of low specific gravity base material and can be used in dose distribution measurements through CT simulation and therapeutic procedures.
By carefully adjusting the temperature and quantity of water applied
Moldcare can be modeled according to each patient’s condition.

PROCESSING PROCEDURE

Before processing the mold, read the manual carefully.

Remove Moldcare from aluminum package. Evenly put water into Moldcare by spray.

Remove excess surface water with a cloth. Mold to the approximate shape of the patient in a reclining position.

The patient lies down on Moldcare & molding is completed.

The process is then complete. The patient stands & the mold is left to complete setting which takes approximately 20 minutes at room temperature.

Remove Moldcare from aluminum package. Evenly put water into Moldcare by spray.

Remove excess surface water with a cloth. Mold to the approximate shape of the patient in a reclining position.

The patient lies down on Moldcare & molding is completed.

The process is then complete. The patient stands & the mold is left to complete setting which takes approximately 20 minutes at room temperature.

BENEFITS

For the Head, Neck, Chest, Trunk and Pelvic regions

Patient posture-adjusting material

The superior base material enables accurate modeling of the patient’s posture.

Reduction of labor time

This revolutionary new patient immobilizing device requires little time or space to set up.

Improvement of patient's Quality Of Life

Patients are provided with a comfortable and secure fit which reduces discomfort during treatment.

High permeability for radiation

It can be used during treatment with a CT simulator as it has a high permeability to radiation.

Volume reduction of waste products

After use to facilitate disposal, the size of the Moldcare can be reduced by use of an autoclave.

MR Safe

Moldcare RI is MR Safe. Therefore, Moldcare RII can be safety taken into any MRI environment

HN 1 Moldcare Patient Immobilization Device

HN 1

BR 1

BR 3 Moldcare Patient Immobilization Device

BR 3

HN 2 Moldcare Patient Immobilization Device

HN 2

HN 5 Moldcare Patient Immobilization Device

HN 5

HN C Moldcare Patient Immobilization Device

HN C

HN E

HN S

HN TR

HN UT

Product Name	Type	Item No.	Specification	Contents Per Pack
Moldcare RI II-HN	0.5	93066	20cm × 15cm	1 pce
	1	93741	20cm × 25cm	1 pce
	2	93742	20cm × 45cm	1 pce
	E	94512	Upper Base: 7cm Lower Base: 20cm Height: 34cm	1 pce
	C	95942	Upper Base: 12cm Lower Base: 20cm Height: 35cm	1 pce
	TR	94232	Trapezoid shape Upper Base: 5cm Lower Base: 58cm Height: 65cm	1 pce
	UT	94521	Upper Base: 20cm Lower Base: 58cm Height: 47cm	1 pce
	S	95941	Upper Base: 30cm Lower Base: 58cm Height: 55cm	1 pce

Moldcare RI II-BR	1	93821	40cm × 60cm	1 pce
Moldcare RI II-BR	3	93822	60cm × 60cm	1 pce